Today’s universities, corporations, educational and medical facilities and even residential homes are more connected than ever. With that interconnectivity comes the challenge of integrating all the various sources of content, such as H.264/H.265 IP cameras, media players, streaming AV channels, computers and laptops, projectors and even traditional Blu-Ray players and set-top boxes.
MuxLab’s next generation HDMI over IP H.264/H.265 PoE Transmitter, 4K/30 (model 500763) brings all these AV sources together with various displays on the same IP infrastructure. By connecting to an Ethernet switch, users can easily create simple distributions of matrixed displays on up to massive video walls with multi-views. Exceptionally low bandwidth requirements allow for streaming AV over a local network, Wi-Fi, and the Internet. This solution boasts high image quality with less than 200ms latency in low latency mode with H.265. Because the scope of the system is limited only by network bandwidth, potentially hundreds of sources and displays can be integrated into the same system for the ultimate in scalability.
Each of MuxLab’s Transmitters can connect AV equipment to a network from up to 100m in distance using a standard CAT5e/6. Once on the network, they work with MuxLab’s H.264/H.265 Receivers (model 500762) to deliver content to one, a few or many displays. Video is up-scaled to 4K@60Hz from 1080p@60Hz or 4K@30Hz for flawless imagery. Two channel audio is embedded and delivered alongside HDMI to the display or extracted at the Receiver. PoE is supported on both the Transmitters and Receivers, eliminating power supplies at local and remote locations.
When used with MuxLab’s ProDigital Network Controller (model 500811), every piece of equipment can be set up, managed, accessed and controlled locally or remotely from any laptop, smartphone or tablet. The new MuxControl App, available for both iOS and Android, gives complete mobility and intuitive control. This system can also be integrated with third party Apps, and you can control end devices via traditional RS232 and directional IR.