Parasound Debuts Improved In-Wall Subwoofer

11-Sep-03

Parasound has introduced and begun deliveries of its model C 1002 in-wall subwoofer that is designed for installation in standard sheetrock 2 x 4 stud walls. It will replace the companyís PAL-1002. The Parasound C 1002 has a 10-inch woofer utilizing dual 8-ohm voice coils rated at 200 watts per channel. The high-efficiency drive motor, coupled with a rigid, low-profile cone made of coated non-pressed cellulose provides a 4 dB higher sensitivity than its predecessor. This increase in sensitivity represents more than double the sound pressure level for the same amplifier power output. With the internal volume of a typical wall cavity, the C 1002 is rated to deliver bass response to below 30 Hz.The C 1002 uses a heavy-duty metal bracket that provides for rigid attachment to the wall to prevent induced vibrations, and to provide a tight seal to prevent air leaks. It includes a cutout mounting template, paint shield, and a mesh screen to protect the back of the driver from in-wall debris.The Parasound C 1002 in-wall subwoofer has a suggested retail price of $250.For more information about Parasound Products, Inc., visit www.parasound.com.

Read More:
http://www.parasound.com