Panamax Safeguards Signal Lines With Eight New Protection Modules

21-Feb-05

Recognizing the need to protect sensitive electronic systems from electrical surges transmitted through remote lines, Panamax is unveiling eight new signal line protection modules. These new modules are designed to work with and complement the PM8-EX, M4-EX, M8-EX and M8-Pro product lines. The new signal line protection modules are also compatible with legacy towerMAX products. They will be available in April of 2005. ìMany of todayís complex installations have a variety of signal lines going to and coming from remote locations. If left unprotected, the head-end system is open to damage from surges coming in on these lines,î said Don King, Director of Product Marketing at Panamax. ìOur new family of add-on modules gives the installer the ability to customize the protection scheme and cover signal lines not protected by the primary surge protector or power conditioner.îThe new Panamax signal line protection modules cover a wide spectrum of applications including analog and digital telephone lines, network lines, CATV and satellite TV lines, as well as outdoor speakers, keypads and control lines. Every protection circuit is ìapplication specificî and has been designed for a particular type of equipment or use. And, as in the case of all Panamax products, each module is thoroughly tested for its protection capabilities relative to its intended use.Hereís a complete list of all eight new Panamax protection modules:MOD-SPKPFor outdoor speakers, keypads, and control lines. Features: screw terminals, 12 AWG maximum wire size, 8 wires protected, 47V clamping, 7 Amp (per wire) capacity. Power handling capacity for outdoor speakers: 225 Watts per channel for 4 Ohm speakers or 450 Watts per channel for 8 Ohm speakers.MSRP: $50. MOD-DBSTVProvides protection for two satellite TV lines, one CATV line, and one telephone line. Satellite TV protection: bidirectional, 25V clamping with <1db attenuation from 950MHz to 2.2 GHz; CATV protection: bidirectional, 1.4V clamping with <1db attenuation up to 950 MHz; Phone line protection: 260V clamping, auto-resetting. MSRP: $60 MOD-AT2Provides protection for two analog telephone lines. Features: RJ-45 jacks (RJ-11/14 compatible), 4 wires protected (pins 3, 4, 5, & 6), 260V clamping, auto-resetting. MSRP: $30 MOD-AT4Provides protection for four analog telephone lines. RJ-11, RJ-14, RJ-45 and 110 punch-down blocks on both input and output for installation flexibility. Features: 8 wires protected, 260V clamping, auto-resetting. MSRP: $50MOD-AT8110Provides protection for eight analog telephone lines. Features: 110 punch-down blocks, 16-wires protected (8 pair), 260V clamping, auto-resetting. MSRP: $80MOD-DT4Provides protection for four digital telephone lines. RJ-11, RJ-14, RJ-45, and 110 punch-down blocks on both input and output for installation flexibility. Features: 8 wires protected, 70V clamping, auto-resetting. MSRP: $50MOD-UTPProvides protection for 10/100 Base-T Ethernet lines. Features: RJ-45 jacks, 4 wires protected (pins 1, 2, 3 & 6), 7V clamping. MSRP: $30MOD-CAT5Provides protection for 10/100/1000 Base-T Ethernet lines. Features: 8 wires protected (4 pair), 19V Clamping, CAT5E compliant.MSRP: $40

Read More: