For more information, contact MULTIDYNE, 800 4TV TEST, 516 671 7278, fax 516 671 3362, info@multidyne.com, or visit the Web site at http://www.multidyne.com.
MULTIDYNE Video & Fiber Optic Systems Announces New Products For NAB 2000
DVM-2000 12-Bit Video And 24-Bit Audio Fiber Optic Multiplexer
The DVM-2000 12-Bit Video and 24-Bit Audio Fiber Optic Multiplexer offers state-of-the-art performance exceeding RS250C short-haul and broadcast specifications. The system will support one video, up to 6 audio and data channels. The transmitter and receiver modules plug into a 10-channel frame with redundant power supplies or are available as stand-alone units. Applications include links from studio to transmitter (STL), studio to studio, studio to CATV head- end, distance learning, satellite up and down links, common carrier transport, Telco circuits and back-haul feeds from special events. The system is available with 850nm and 1300nm wavelength LEDs for multimode and 1300nm and 1550nm wavelength lasers for singlemode applications. DAS-1000 10 By 1 Serial Digital Video And AES/EBU Audio Routing Switcher The DAS-1000 10 BY 1 Serial Digital Video and AES/EBU Routing Switcher supports vertical interval switching of 1 video and up to 2 AES/EBU audio channels on a 10 by 1 matrix. The unit includes 1 video and 2 audio breakaways, 350 meter cable equalized video inputs and 2 re-clocked video outputs. The unit supports 75 ohm single-ended and 110 ohm balanced AES/EBU audio. The unit supports 143, 177, 270, 360 and 540 Mbit/sec (million bits/sec) SMPTE 259M Serial Digital Video and complies with SMPTE RP 168 Vertical Interval Switching. Remote control panels are optionally available which operate at distances of up to 3000 feet over a standard audio cable without an external power source. Power is supplied to the remote panels through the control cable. The switcher also supports RS-232 remote control through a modem or dumb terminal. Several Switchers can be ganged together to form a 10 by N and a N by 1 matrix for larger applications where more inputs or outputs are required. The 10X3 Adapter Panel with XLR connectors is optionally available to bridge the audio inputs of 3 or more DAS-1000 switchers for a 10 by 3+ matrix. DTV-100 Series Of Stand-Alone Serial Digital Video Distribution And Fiber Optic Products For DTV The DTV-100 Series of Stand-alone Serial Digital Video Distribution and Fiber Optic products is intended to ease the engineering and financial difficulties associated with the migration to DTV. The DTV-100 line will provide an economical solution for the coaxial and fiber optic transport and distribution of virtually any digital signal from 50 to 1.5Gbps. The supported standards include SMPTE 259M Serial Digital Interfaces (SDI), 4:2:2 component and widescreen, 540Mbps 4:4:4:4, Sonet/SDH and ATM. The DTV-100 Series of products are available in compact stand-alone packages making them ideal for applications including field remotes, sporting events, ENG/SNG and production. The power requirements are 110 and 220VAC with a wall-mount power supply or 12VDC from a BP-90 battery. The DTV-120-FTX Serial Digital Video Fiber Optic Transmitter and DA provides one coaxial input, 1 coaxial output and one Fiber Optic output. The compact unit offers an economical solution for the distribution of digital signals from DC to 650Mbps up to 10km over multimode and singlemode fiber optic cables. The units are available in 1300nm and 1550nm wavelengths. The DTV-110-FTX supports SMPTE 259M Serial Digital Interfaces (SDI), 4:2:2 component and widescreen, 540Mbps 4:4:4:4, Sonet/SDH and ATM. The WDM-100 provides Wave-Division multiplexing of 1300nm and 1550nm wavelengths on the same fiber providing two serial digital streams on one fiber. The DTV-120-FRX Serial Digital Video Fiber Optic Receiver and DA provides one fiber optic input and 2 re-clocked coaxial outputs. The small unit offers an economical solution for the distribution of digital signals from DC to 650Mbps up to 10km over multimode and singlemode fiber optic cables. The cards are available in 1300nm and 1550nm wavelengths. The DTV-110-FRX supports SMPTE 259M Serial Digital Interfaces (SDI), 4:2:2 component and widescreen, 540Mbps 4:4:4:4, Sonet/SDH and ATM. The DTV-102 Serial Digital Video Fanout DA provides 1 coaxial input, 8 coaxial outputs and supports SMPTE 259M Serial Digital Interfaces (SDI), 4:2:2 component and widescreen, 540Mbps 4:4:4:4, Sonet/SDH and ATM. The DA offers an economical solution for the distribution of digital signals from DC to 650Mbps when reclocking is not required in a small compact package. The DTV-110 Automatic Standard Reclocking DA provides the automatic reclocking of digital signals from 40 to 400Mbps. The card supports SMPTE 259M, 4:2:2 component, 360Mbps widescreen, Sonet/SDH and ATM. The DTV-110 provides 1 coaxial input and 8 coaxial outputs in a small compact package. HD-1500 Series Of 1.5GB/Sec Serial Digital Video Distribution And Fiber Optic Products For HDTV The new HD-1500 Series of 1.5 GB/Sec Serial Digital Video Distribution and Fiber Optic products is intended to ease the engineering and financial difficulties associated with the migration to DTV. The HD-1500 line will provide an economical solution for the coaxial and fiber optic transport and distribution of virtually any digital signal from 50 to 1.5Gbps. The supported standards include SMPTE 292M Serial Digital Interfaces (SDI), 4:2:2 component and widescreen, 540Mbps 4:4:4:4, Sonet/SDH and ATM. The HD-1500 Series of products are available in compact stand-alone and rack-mount packages making them ideal for applications including field remotes, sporting events, ENG/SNG and production. The power requirements are 110 and 220VAC with a wall-mount power supply or 12VDC from a BP-90 battery. The HD-1500-FTX 1.5GB/Sec Serial Digital Video Fiber Optic Transmitter and DA provides one coaxial input and one Fiber Optic output. The compact unit offers an economical solution for the distribution of digital signals from DC to 1.5Gbps up to 10km over multimode and singlemode fiber optic cables. The units are available in 850nm and 1300nm wavelengths. The HD-1500-FTX supports SMPTE 292M Serial Digital Interfaces (SDI), 4:2:2 component and widescreen, 540Mbps 4:4:4:4, Sonet/SDH and ATM. The WDM-100 provides Wave-Division Multiplexing of 850nm and 1300nm wavelengths on the same fiber providing two serial digital streams on one fiber. The HD-1500-FRX 1.5 GB/Sec Serial Digital Video Fiber Optic Receiver and DA provides one Fiber Optic input and 2 re-clocked coaxial outputs. The small unit offers an economical solution for the distribution of digital signals from DC to 1.5Gbps up to 10km over multimode and singlemode fiber optic cables. The cards are available in 850nm and 1300nm wavelengths. The HD-1500-FRX supports SMPTE 259M Serial Digital Interfaces (SDI), 4:2:2 component and widescreen, 540Mbps 4:4:4:4, Sonet/SDH and ATM. The HD-1510 1.5GB/Sec Reclocking Fanout DA provides the reclocking and distribution of 1.5GB/Sec Serial Digital Video. The card supports SMPTE 292M, 4:2:2 component, 360Mbps widescreen, Sonet/SDH and ATM. The DTV-1510 provides 1 coaxial input and 2 re-clocked coaxial outputs in a small compact package. DTV-200 Series Of Modular Serial Digital Video Distribution And Fiber Optic Products For DTV The new DTV-200 Series of Modular Serial Digital Video Distribution and Fiber Optic products is intended to ease the engineering and financial difficulties associated with the migration to DTV. The DTV-200 line will provide an economical solution for the coaxial and fiber optic transport and distribution of virtually any digital signal from 50 to 1.5Gbps. The supported standards include SMPTE 259M Serial Digital Interfaces (SDI), 4:2:2 component and widescreen, 540Mbps 4:4:4:4, Sonet/SDH and ATM. The DTV-200 Series of products is available in modular plug-in cards compatible with the MULTIDYNE UTIL-200 Series of Grass ValleyT Compatible Modular Trays. The DTV-200 Series is ideal for application for the transport of multiple channels of serial digital video from studio to studio, field remotes, sporting events, back-haul feeds, ENG/SNG and production. The DTV-220-FTX Serial Digital Video Fiber Optic Transmitter and DA provides one coaxial input, 4 coaxial outputs and one fiber optic output. The card offers an economical solution for the distribution of digital signals from DC to 650Mbps up to 10KM over multimode and singlemode fiber optic cables. The cards are available in 1300nm and 1550nm wavelengths. The DTV-210-FTX supports SMPTE 259M Serial Digital Interfaces (SDI), 4:2:2 component and widescreen, 540Mbps 4:4:4:4, Sonet/SDH and ATM. The WDM-200 provides Wave-Division Multiplexing of 1300nm and 1550nm wavelengths on the same fiber providing two serial digital streams on one fiber. The DTV-220-FRX Serial Digital Video Fiber Optic Receiver and DA provides one Fiber Optic input and 4 coaxial outputs. The card offers an economical solution for the distribution of digital signals from DC to 650Mbps up to 10KM over multimode and singlemode fiber optic cables. The cards are available in 1300nm and 1550nm wavelengths. The DTV-210-FRX supports SMPTE 259M Serial Digital Interfaces (SDI), 4:2:2 component and widescreen, 540Mbps 4:4:4:4, Sonet/SDH and ATM. The DTV-201 Serial Digital Video Fanout DA. The DA offers an economical solution for the distribution of digital signals from DC to 400Mbps when reclocking is not required. The DTV-201 provides 1 coaxial input, 4 coaxial outputs and supports SMPTE 259M, Sonet/SDH and ATM. The DTV-202 Serial Digital Video Fanout DA provides 1 coaxial input, 8 coaxial outputs and supports SMPTE 259M Serial Digital Interfaces (SDI), 4:2:2 component and widescreen, 540Mbps 4:4:4:4, Sonet/SDH and ATM. The DA offers an economical solution for the distribution of digital signals from DC to 650Mbps when reclocking is not required. The DTV-210 Automatic Standard Reclocking DA provides the automatic reclocking of digital signals from 40 to 400Mbps. The card supports SMPTE 259M, 4:2:2 component, 360Mbps widescreen, Sonet/SDH and ATM. The DTV-210 provides 1 coaxial input and 8 coaxial outputs. FM Video, Data And Audio Fiber Optics For Security & Transportation Model FTX-100 / FRX-100 & FMX-120 MULTIDYNE introduces the FTX-100 Series of FM Video, Data and Audio Fiber Optic Systems. The industry shattering system uses state of the art frequency modulation (FM) techniques for superior video performance. The specifications exceed RS-250C Medium-haul specification over the entire optical budget for both multimode and singlemode optics. The video signal to noise ratio is up to 70dB and a 10MHz bandwidth. The differential gain and differential phase are less than 1 percent and 1 degree, respectively. The superior video quality is achieved using technology developed for the MULTIDYNE broadcast fiber optic product line that exceeds RS-250C Short-haul specifications. The FTX-100 Series supports up to 6 full duplex data channels for RS-232C, RS-422 and CMOS at up to 38.4kBits. For camera remote control, the system supports most protocols including Vicon, Pelco, Burle and American Dynamics. Up to two audio channels with up to a 10kHz bandwidth are available for intercom and PA applications. The system supports remote sensing of laser power, video presence and data parity over the optical fiber through a dedicated data channel. The power supply input voltage requirements for the FTX-100 are 9-12VAC with a wall-mount power supply or transformer. Systems are available in portable, wall-mount and triple rack-mount configurations with 850nm and 1300nm LED multimode and 1300nm laser single-mode optics. The optical budget is up to 28dB using a 1300nm singlemode laser. Applications include security, surveillance, distance learning, teleconferencing, medical, industrial, broadcast and cable television, identification systems and intelligent transportation systems. Data and Audio Fiber Optic Multiplexer for Security & Transportation - Model FMX-120 The FMX-120 Series supports up to 12 full duplex data channels of RS-232C at up to 38.4kBits. Up to 2 audio channels with up to a 5kHz bandwidth are available for intercom and PA applications. The system supports remote sensing of laser power, video presence and data parity over the optical fiber through a dedicated data channel. The power supply input voltage requirements for the FMX-120 are 9-12VAC with a wall-mount power supply or transformer. Systems are available in portable, wall-mount and triple rack-mount configurations with 850nm and 1300nm LED multimode and 1300nm laser single-mode optics. The optical budget is up to 28 dB using a 1300nm singlemode laser. Applications include security, surveillance, distance learning, teleconferencing, medical, industrial, broadcast and cable television, identification systems and intelligent transportation systems. The entire MULTIDYNE product line is designed and manufactured in the U. S. A. and carries a 7 year warranty.